Additionally, all our production procedures are in compliance with ISO9002 standards for a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes....
Overview
Quick Details
- After Warranty Service:
-
Video technical support
-
Local Service Location:
Maintenance Maintenance on these units is straight forward and like all moving parts these need their fair share of grease and should be greased regularly as these components work very hard and are subject to all that nature can provide for wear and tear. Good grease is essential here; put grease in until you see the old grease oozing out. Go easy on the “U” joints so you don’t blow the seals. Short bursts of a low pressured air grease gun or even better a hand pump gun will do the job and should be done based on hourly use. At least once a season the primary and secondary shafts should be separated. All debris and any rust should be cleaned off. Examine thoroughly for any signs of stress and apply a liberal amount of grease. In addition to this, both the PTO yoke holes need grease inside of them at least once a year along with the yoke lock pin. -
Egypt
- Showroom Location:
-
Egypt
- Type:
-
parts
When it comes to maximum performance and the very latest technologies, the products in our High-End segment are first choice. Our highly innovative solutions and exceptional quality are sure to excite you. Our EPG ® series, for instance, sets new benchmarks in terms of power density
- After-sales Service Provided:
-
Video technical support
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case
- Port
- NINGBO/SHANGHAI, CHINA
-
Lead Time
: -
Quantity(Bags) 1 - 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
TECHNICAL DATA
TYPE | BM4-160 BM4S-160 BM4W-160 | BM4-200 BM4S-200 BM4W-200 | BM4-250 BM4S-250 BM4W-250 | BM4-320 BM4S-320 BM4W-320 | BM4-400 BM4S-400 BM4W-400 | BM4-500 BM4S-500 BM4W-500 | BM4-630 BM4S-630 BM4W-630 | BM4-725 BM4S-725 BM4W-725 | |
Displacement(ml/r) | 158.8 | 200.8 | 252.2 | 317.5 | 401.6 | 535.3 | 630.5 | 728.6 | |
Max.Pressure.Drop(Mpa) | cont. | 20 | 20 | 20 | 20 | 18 | 16 | 14 | 11.5 |
int. | 24 | 24 | 24 | 24 | 21 | 18 | 16 | 13 | |
peak. | 28 | 28 | 28 | 28 | 24 | 21 | 19 | 16 | |
Max.torque(N.m) | cont. | 450 | 561 | 710 | 902 | 1008 | 1121 | 1124 | 1067 |
int. | 559 | 714 | 883 | 1143 | 1255 | 1377 | 1317 | 1236 | |
peak. | 663 | 818 | 1021 | 1322 | 1431 | 1598 | 1602 | 1559 | |
Max. Speed (cont.)(r/min) |
625 | 495 | 395 | 310 | 245 | 185 | 155 | 135 | |
Max.Flow(cont.)(L.min) | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
Max.Output.Power(cont.)(Kw) | 20.1 | 25.2 | 25.2 | 25.2 | 22 | 21 | 20 | 19 | |
Weight(kg) | 20.3 | 20.8 | 21.4 | 22.4 | 23 | 24 | 25 | 26 |
Intermittent operation the permissible values may occur for max.10% of every minute
Peak load:the permissible values may occur for max.1% of every minuteOur company is located in XiHu HangZhou Zhejiang Province. T