DUMP TRAILER Power UNIT- SINGLE ACTING
This energy unit includes a electrical power up gravity down circuit. Start out the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve might be provided if needed. Also a strain compen sated movement control is usually additional to your circuit to control the descent velocity with the cylinder.
Remark: Please seek advice from our product sales engineer for the various pump displacement, motor energy or tank capacity.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned ahead of set up of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities.N46 hydraulic oil is suggested.
four. The electrical power unit need to be mounted horizontally.
5. Check the oil level inside the tank just after the first running in the power unit.
6. Oil modifying is needed soon after the initial 100 operation hours, afterwards once every 3000 hrs.
DUMP TRAILER Power UNIT-DOUBLE ACTING
This electrical power unit includes a energy up electrical power down circuit with load holding on the two A & B ports. A pressure compensatred movement manage is often extra to circuit to regulate the decent velocity from the cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned ahead of set up of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should really also be clean and cost-free of impurities. N46 hydraulic oil is advisable.
four. The energy unit must be mounted horizontally.
five. Check the oil degree inside the tank immediately after the initial running with the electrical power unit.
6. Oil shifting is required immediately after the initial one hundred operation hrs, afterwards when every single 3000 hrs.