Coupling diaphragm, diaphragm coupling, elastic pin coupling, drum gear coupling, serpentine spring coupling, coupling manufacturer, motor coupling_Hangzhou Hengli Transmission Parts Limited company

　　Jacketed shaft coupling JQ type jacketed shaft coupling is used for the connection of the two stirring shafts when the reactor stirring shaft is too long. When the two stirring shafts are manufactured in two stages, the jacketed shaft coupling is used if the output shaft of the vertical reducer is connected with the reactor stirring shaft. , Need to be put forward when ordering, in order to use non-standard requirements for the output shaft size

　　The diaphragm coupling is composed of several groups of diaphragms (stainless steel thin plate) which are interlaced with two halves of the coupling with bolts. Each group of diaphragms is made up of several pieces. The diaphragms are divided into connecting rod type and different shapes. The whole piece.The diaphragm coupling relies on the elastic deformation of the diaphragm to compensate the connected two

　　When selecting a coupling, whether the shaft hole has a counterbore or not depends mainly on whether the shaft can have axial movement, whether axial tension or installation space is required.There are three types of shaft holes for couplings: Y-type, J-type, and Z-type.

　　Diaphragm couplings. Each coupling is composed of several diaphragms of equal thickness. The outer edge of each piece has a circular arc shape. The elasticity is better, and the shape is simple, and the processing is convenient, but the elasticity is poor. In addition, the elasticity with a small number of sides requires Elasticity is better than more edges.